2.250" REAR SPRING CONVERSION KIT: ELAN AOSC001 £248.60    view
2.250" REAR SPRING CONVERSION KIT: +2 BOSC001 £248.60

The kit comprises of:-

2 x SPRINGS 2.250": ELAN OR +2

2 x LOWER SPRING SEATS: ADJUSTABLE

2 x LOWER SPRING SEAT LOCKING RINGS

2 x THREADED STEEL SLEEVES

2 x MACHINED UPPER SPRING SEAT ALLOY HOUSINGS

2 x SETS POLYURETHANE BUMP STOPS

Labour charges for converting the rear struts:

Removing the rear suspension, final drive and rear brakes. Stripping down, converting the struts to 2.250" and rebuilding the rear end. £350.00

Or alternatively...

Converting your already stripped down Elan rear struts. £61.25

Spyder fabricated replacement rear struts   £198.00 each   veiw

These are a direct replacement for the original Lotus type with steel bearing housing eliminating the associated corrosion and bearing fit problems of the original alloy units. These have been designed to accept both the early Elan and later Plus 2 wheel bearing arrangement as used by Lotus or the twin large wheel bearings as used on our Rear Suspension Conversion systems. The struts will accept both the original Lotus size and a 2.25" spring, both incorporates adjustable ride height as standard.

@ = each

+2 UPPER REAR SEAT BELT MOUNTING PLATE KIT: BOWHP001 BOWHP001 £149.00
+2 LOWER REAR SEAT BELT MOUNTING SET: SPYSBMK02 SPYSBMK02 £29.50 PER SIDE
+2 UPPER FRONT SEAT BELT MOUNTING SET: ZTCSBFK08 ZTCSBFK08 £39.50 PER SIDE
+2 REAR HARNESS TO SUIT ABOVE (BOWHP001) BLACK TRS SPYH001 £69.85 EACH SIDE
ELAN INERTIA SEAT BELT CONVERSION FHC & DHC   SPYEL014L & R £49.50 EACH SIDE
INERTIA REEL SEAT BELTS FOR ABOVE SPYEL015 £53.75 EACH

 

Spyder twin wishbone rear suspension system (RSC) for the Lotus Elan and Elan Plus 2.

R.S.C. BASIC SPEC: ELAN                      AOCX022 £850.60     view

Using your existing lower rear wishbones.

R.S.C. FULL SPEC: ELAN   AOCX024 £1093.60

Including lower rear wishbones and all new bushings.

R.S.C. BASIC SPEC: +2  BOCX023 £870.60

Using your existing lower rear wishbones.

R.S.C. FULL SPEC: +2  BOCX025 £1113.60

Including lower rear wishbones and all new bushings.

LOWER REAR WISHBONES

Finished in black powder coat.

L/H: ELAN AOWB007 £73.50     view
R/H: ELAN       AOWB006 £73.50
+2       18WB008 £73.50

Manufactured in flat sided oval to check distortion under braking and to prolong the life expectancy of the strut inserts. Bushes can be supplied at extra cost. See price list.

 

ADJUSTABLE LOWER REAR TOE WISHBONES

Manufactured in 7/8" Round x 16swg mild steel

+2 18WB010 £117.00   view
ELAN L/H AOWB010 £117.00 EACH
BUSHES CAN BE SUPPLIED & FITTED AT EXTRA COST    

 

ADJUSTABLE LOWER REAR WISHBONES

Designed for competition use (less rod end bearings).

L/H: ELAN       AOWB041 £93.75
R/H: ELAN       AOWB040 £93.75
+2   BOWB044 £99.50

BUSHINGS

Lower rear wishbone, supplied and press fitted.

INBOARD END: ELAN AND +2    01SV003 £8.70
OUTBOARD END: ELAN AND +2 01SV004 £7.30

SPRINGS: REAR
CONVENTIONAL SUSPENSION: ELAN  AOSP001 £44.50
R.S.C. SYSTEM: ELAN       02SP003 £44.50
CONVENTIONAL SUSPENSION: +2 BOSP002  £44.50
R.S.C. SYSTEM: +2  BOSP018 £44.50

Only chrome vanadium springs are supplied by Spyder to ensure correct free and loaded lengths, proper rate (spring stiffness), consistent ride height and freedom from sagging.

The springs above have been designed by Spyder and do not necessarily have the same wire diameter or number of coils as those supplied originally by Lotus Cars.

STRUT INSERTS AND DAMPERS: REAR

 with external adjustment to suit the Chapman strut layout, pre-set and ready for use.

ELAN AND +2   01DA004 £99.90

PROTECH rear dampers to suit the R.S.C. systems.

ELAN AND +2  19DA001 £89.90

HUB CARRIER (UPRIGHTS) : R.S.C. SYSTEMS 

L/H: ELAN AND+2   01HC002 £183.75
L/H: ELAN AND+2   01HC001 £183.75

UPPER REAR WISHBONES: R.S.C. SYSTEMS

L/H: ELAN AND +2    01WB018 £83.59
R/H: ELAN AND +2    01WB017 £83.59

1 2 4 5 6 7 8